Sentence examples for improvement in adhesion from inspiring English sources

The resistivity was improved by not only carrier doping but the improvement in adhesion of doped graphene flakes.

Vitronectin-adsorbed surfaces did not show significant improvement in adhesion over unmodified membranes.

Preliminary results showed that by introducing a nontoxic precursor, octamethylcyclotetrasiloxane (D4), and under normal microwave plasma CVD conditions, Si could be made concentrating onto the interface, benefiting the improvement in adhesion of the diamond coatings.

This improvement in adhesion also results in a considerable increase in the elongation at break, from 20 to 140% when 2.4 wt% of catalyst is added to a 70/30 PETG/EVA blend.

A slight improvement in adhesion was observed in the case an Al pretreatment was carried out, while the best results were obtained using Cr and W. Here, 30-s-long pretreatments were sufficient to clean the steel surface and form a metallic interlayer between substrate and coating.

Significant improvement in adhesion was achieved by the presence of a XLA, such as 2,4,6-triallyloxy-1,3,5-triazine (TATZ), or 1,3,5-triallyl benzene tricarboxylate (TBTC), in VIDZ during the thermal graft copolymerization and lamination process.

These physico-chemical changes induced by the CAP plasma treatment facilitates the improvement in adhesive strength as well as adhesion and proliferation of cells on the surface of LDPE films.

The multilayer in comparison with bi-layer shows significant improvement (22%) in adhesion under decreased interfacial stress conditions without any affect on overall coating stiffness and hardness.

An improvement in interfacial adhesion strength was obtained using the adhesion promoters.

It is clearly shown that the increase in mechanical properties arises from improvement in interfacial adhesion between BF and PBT.

The starch particle size is reduced from hundreds-μm to sub-μm after the compatibilization accompanied by an improvement in interfacial adhesion.