Sentence examples for improve fabrication efficiency from inspiring English sources

Although the rise of etching temperature can improve fabrication efficiency, fabrication depth is dependent only upon contact pressure and scanning cycles.

In order to improve the fabrication efficiency, the native oxidation layer on the Si(100) surface was removed by HF etching before scratching.

To improve the fabrication efficiency, quartz samples were etched at various temperatures ranging from 273 to 328 K after scanning under constant loads of 5, 8 and 12 μN.

To improve the fabrication efficiency with the tip-based DPL method, a scratching velocity that ranges from 0.1 to 1000 μm/s is investigated and demonstrated based on the commercial AFM tapping mode.

To improve the performance of HG TFETs, improved fabrication methods were proposed.

Even though the rise of etching temperature can improve the efficiency of fabrication, the fabrication depth is controlled by the contact pressure and scanning cycles.

To improve the efficiency of fabrication, selective etching of the scanned area was tested at various temperatures.

(1) Figure 3 Effect of etching temperature on fabrication efficiency.

However, it is likely that the resistance of electrode material i.e. ITO on top of PET substrate is limiting the efficiency thus, the use of alternative electrode material could improve the efficiency or the fabrication of smaller cell size when ITO is used as electrode material [5, 19].

The fabrication techniques aforementioned are mainstream techniques that have been applied to NP fabrication to improve light emission efficiency.

Although steam curing can effectively increase the early-age strength of concrete in addition to other material properties and hence improve production efficiency, it increases the fabrication cost due to the consumption of fuel.