Therefore, the total number of multiplications required to implement the conventional detector is 4N.
Table 4 Processing times required for implementing the conventional DEDR and the developed POCS-regularized (SW/HW codesign-based) unified DEDR-POCS techniques (RSF and RASF).
The number of computation in terms of the number of multiplication required to implement the conventional detector is [13]: 1. Mixing of the incoming signal with two sinusoid signals with 90° phase difference requires 2N multiplications.
This study implements the conventional mechanism-based strain gradient plasticity (CMSG) in the engineering fracture assessment of structural steels, to estimate both the near-tip opening displacements and the probability of brittle fracture.
Our work further reveals that, when the effect of mutual coupling is concerned, it is still possible to achieve better spectral efficiency by placing a few more than necessary antenna elements in user equipment and applying an appropriate antenna selection approach than plainly implementing the conventional MIMO system without antenna selection.
Although in this phase SIP devices cannot be supported, some services that are more easily implemented on SIP, such as voice calling and click to dial, may be implemented for the conventional Cable user endpoints.
However, when considering the total area of implemented wetlands, the conventional method based on long-term impacts of wetland implementation showed the highest amount of phosphorus reduction (36.44 t/year).
This approach can be easily implemented by the conventional commercial programs, e.g., SAP2000 (Pasticier et al. 2008).
However, transparent encryption can also be implemented in the conventional approach [10], the small resolution portion of the JPEG2000 file is simply left in plaintext.
Strain in silicon, germanium, and silicon germanium have been successfully implemented by the conventional semiconductor industry, with significant improvements in carrier mobility [12 14].
