Sentence examples for implementation of the detector from inspiring English sources

Section 9 presents both the FPGA-and ASIC-based implementation of the detector.

In Section 3 a sequential implementation of the detector is given while showing its real time estimation and drawbacks.

When compared to detector A, higher signal levels and lower frequencies are present at position B, and therefore, the implementation of the detector itself is less demanding.

However, in order to evaluate a first implementation of the detector, parameter values used for the WiFi case were considered as an initial assumption.

In a practical implementation of the detector (9), it is clear that estimates of the Pareto clutter parameters will need to be used.

The VLSI implementation of the detector is presented to show that real-time MIMO symbol detection of 20 MHz bandwidth 3GPP LTE and 10 MHz WiMAX downlink physical channel is achievable at reasonable silicon cost.

We discuss the design and implementation of the Louvain Edinburgh Detector Array: a charged particle detector array composed of silicon-strip detectors which is used for the study of nuclear astrophysics and nuclear physics using radioactive nuclear beams at the Louvain-la-Neuve radioactive nuclear beam facility.

However, the implementation of this detector structure in HgCdTe material system is not straightforward due to the existence of a valence band discontinuity (barrier) at the absorber barrier interface.

And the implementation of this detector is summarized as follows.

The factor κ can be used to minimise the effects of detector saturation, as observed in the practical implementation of the CFAR detector (7).

Finally in Section 7, practical implementations of the detectors - the Locally Most Powerful (LMP) test and the Generalized Likelihood Ratio Test (GLRT) - are proposed.