Sentence examples for impinges with from inspiring English sources

While the secondary flow inside the louver scheme passes through a bend and impinges with the blade material causing impingement effect, then exits to the outer surface of the aerofoil through the film cooling hole.

Indeed, during hip internal rotation when the cam morphology is present, the proximal femur impinges with the acetabular rim, limiting the range of motion (ROM) [65].

This work presents a simple method to evaluate the performance of a porous breakwater when it is impinged with normal incidence by a non-breaking monochromatic wave train.

In the experiment, charged clusters composed typically of several thousand TiN are electrically accelerated and impinge with kinetic energies up to 20 keV onto a room temperature substrate.

Droplet formation and size distributions from an immiscible interface impinged with a vertical negatively buoyant jet.

The developed fingerprints show fluorescence when impinged with radiation having 580 nm radiation.

Assuming free field condition, plane waves, and a single source signal s1[ n] impinging with DOA φ on a uniform linear array (ULA), as shown in Figure 3a,b, the relationship between the i th and l th microphone signal is equal to x i [ n ] = x ℓ n e − j ψ i ℓ [ n ] (9) Figure 3 Direction of arrival.

The k-th wave impinging with angle of arrival φ k arrives at the i-th element with a delay (tau _{k_{i}}) with respect to the UCA center: tau_{k_{i}}=-frac{rcdotcosleft(theta_{i}-varphi_{k}right)}{c}, (2).

The present approach does not consider droplet nucleation and according to previous experimental results [15] we assume a deposition-time independent droplet density N D. Al and As atoms impinge with fluxes F Al and F As on the surface which increases the respective adatom densities.

A lower range of forces was applied with respect to the compressive dynamic test to prevent sample deformation that impinged with the test setting.

Both NiCrBSi sprayed coating and SUS304 stainless steel exhibit impinged surfaces with lots of furrows at an impinged angle of 30°.