Your English writing platform
Discover LudwigExact(5)
From the results, the axi-symmetric pattern of recovery factor on an impinged surface is broken and the low recovery factor zone shifts to the downward region as the inclination angle increases.
At a high impinged angle of 90°, the SUS304 stainless steel exhibits an impinged surface with lots of overlapping and irregular concavities, while, these features are less obvious for NiCrBSi sprayed coating.
Secondary electron (SE) images show obvious grain shapes on the complex impinged surface of sandstone and marble by supercritical CO2 jet, and cleavages on the mineral grains, and cracks and holes between the grains in different sizes.
An interesting behavior was though observed for supercritical injection temperatures: when the impinged surface is still at subcritical temperatures, the peak of the water's specific heat at the pseudo-critical temperature dominates the heat transfer even at injection temperatures far beyond the pseudo-critical temperature.
The average mass transfer rate on the impinged surface was measured with a limiting current technique for a range of the nozzle Reynolds numbers from 2500 to 20,000, the nozzle height from 0.1 to 5 nozzle diameters and the radius of the active mass transfer area from 0.1 to 5 nozzle diameters.
Similar(55)
Both NiCrBSi sprayed coating and SUS304 stainless steel exhibit impinged surfaces with lots of furrows at an impinged angle of 30°.
Impinging liquid jet is an established technique to provide high local heat transfer coefficients between the impinged liquid and a surface.
The impinged target was the flat surface of a water-cooled calorimeter, custom designed to sustain high heat fluxes and high surface temperatures.
The radicals adsorbed on the surface are dissociated by the binary collisions with the impinged atoms and a part of hydrogen atoms are released from the surface.
Axial surface strain of the impacted bar was measured at several distances from the impinged end to include the near and the far fields.
My folks could be strict, even inflexible, but mostly concerning some aspect of my behavior that impinged directly upon them.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com