Sentence examples for impacts on the maximum from inspiring English sources

The roughness has much stronger impacts on the maximum shear stress than on the final shear stress.

It is shown that the layout of the air flow channels has great impacts on the maximum temperature and the temperature difference.

"Our income for last season was down 30% and this impacts on the maximum permitted budget we can allocate for players next season," chairman Steve Wallace told the club website.

Through careful selection of which tracer rules to violate, ideally ones that have a lesser impact on the maximum sensitivity for a given flux, a single tracer can be chosen to resolve both free fluxes with precision that approaches that of the optimal tracers we suggested (see Additional file 6).

This is a critical quantity for electron sources as it has a direct impact on the maximum brightness achievable.

The experimental results show that the different ignition position has less impact on the maximum hydrogen explosion pressure in big vessel, however, the impact on the maximum hydrogen explosion pressure in small vessel and the maximum hydrogen explosion pressure rising rate in linked vessels is obvious.

The permeability and thermal conductivity of bentonite/crushed rock mixtures used as backfill for a nuclear waste repository have an important impact on the maximum radioactive load of the waste canister that can be embedded.

The results suggest that partial DNAPL remediation does not tend to have a dramatic impact on the maximum extent of the plume if very low concentration values are used to define the plume boundaries.

On the other hand, the magnitude of any electronic conductivity in an oxide-ion conductor has a great impact on the maximum voltage and electrical efficiency achievable by the SOFC.

Under normal operation, the layer of silicon carbide coating had a less significant impact on the maximum fuel temperature, and the temperature remained lower than the maximum acceptable fuel temperature of 1495 °C for normal operation even when a thick layer of silicon carbide was applied.

In this paper, a generic methodology is presented to assess the impact on the maximum allowable temperature in the FW of 3 geometrical design factors, the distance from the plasma facing side of the first wall (FW) to the cooling channel and the poloidal and radial dimensions of the cooling channel.