Skeletal muscles were dissected and either flash-frozen in liquid nitrogen or imbedded in optimal cutting temperature (OCT) compound (Tissue-Tek, Torrance, CA, USA) for cryostat sectioning.
These are temperature sensors that are imbedded in the structure of the vehicle.
Following 3 washes in PBS, samples were decalcified in 0.5 M EDTA for 2 5 days at 4°C, equilibrated in 30% sucrose in PBS overnight at 4°C, and imbedded in 1% low gelling temperature agarose (Sigma Type VII) dissolved in PBS containing 18% sucrose.
Unlike ceramics, plastics don't have to be fired at high temperatures and can be imbedded with copper circuits.
With larger motors, temperature-sensitive detectors may be imbedded at one or more locations in the stator windings.
Six evaporation methods are imbedded in the model Penman, Penman Montieth, Kimberly Penman (combination method), Hargreaves (temperature based), Priestly and Taylor and Turc (radiation based).
Based on fuzzy inference system, the fuzzy controller processes and analyze the temperature and humidity data collected from the sensors imbedded in the air inlet of the air conditioner and from ZigBee WSN sensor nodes, determines the best operation mode, and issues control commands to maintain a suitable greenhouse environment.
Healthy embryos between 1K-cell and high-oblong cell stages, which occurs around 3 4 hr postfertilization (hpf) depending on temperature conditions (Kimmel et al. 1995), were aligned in troughs imbedded in an agarose plate as described in The Zebrafish Book (Westerfield 2000).
A mechanical pressure gauge was used to measure the nozzle inlet pressure which was assumed to be equal to the spray pressure with an OMEGA 0.125-mm 0.125-mm T-type thermocouple imbediameterthe flow tube justhermocouple nozzle to measure the deimbeddedwater temperature.
A thermocouple imbedded in the test piece and another in the inert material are connected so that any differential temperatures generated during the heating cycle are graphically recorded as a series of peaks on a moving chart.
The analysis of a flow-reversal reactor, constructed from a catalytic bed imbedded within two inert beds and catalysing an instantaneous reaction, shows that the main parameters that determine the maximal reactor temperature are the thermodynamic parameters, heat loss through the walls and the conductivity and length of the inert zones.
