Sentence examples for illumination objective and from inspiring English sources

The sample chamber between the illumination objective and detection objective 1 is drawn in more detail on the right side of the schematic showing the position of the scattering layer and of the glass capillary containing the sample.

The other mirror (M) is conjugated to the pupil plane of the illumination objective and can be used to adjust the z coordinate of the light sheet in order to bring it into focus for imaging.

Larger tunable range of DOF could be obtained by using an illumination objective with low NA and magnification (Supplementary information, Figure S1I-S1K), but it would increase the thickness of light sheet and sacrifice the spatial resolution of the system (Supplementary information, Figure S1L).

The light sheet had to be created within the working distance of 280 µm of the detection objective and was produced by a dedicated illumination objective lens with a high NA in order to achieve a thin light sheet with an axial extension of only 3 µm full-width-at-half-maximum (FWHM).

Z.1 light sheet fluorescence microscope system was equipped with a Carl Zeiss W Plan-apochromat 20x/1.0 detection objective and a Carl Zeiss LSFM 10x/0.2 illumination objective.

The high NA of the illumination objective resulted in a strong convergence of the focused beam and a corresponding short working distance of the illumination objective.

Light sheet imaging was performed with a Lightsheet Z.1 system (Carl Zeiss, Germany) equipped with a water immersion 20x detection objective lens (W Plan Apochromat, NA 1.0), dual sided 10x illumination objective lenses (LSMF, NA 0.2), a pco.edge scientific CMOS camera (PCO) and ZEN software.

As illumination objective we used a plan apochromat 10×, NA 0.28 long working distance objective lens (Mitutoyo, Japan).

A special long working distance illumination objective (10×; NA = 0.28; working distance, 33.5 mm; Mitutoyo, Japan) met all construction conditions.

The forward generated CARS signal is collected by a 40X/0.8NA water immersion objective (Olympus, LUMPlanFl/IR), while the epi-detected signals returns through the illumination objective.

The laser is incident vertically onto a resonant mirror (RM) which is conjugated to the image plane of the illumination objective (Nikon CFI Plan Fluor 10 ×W).