Sentence examples for illumination current from inspiring English sources

The dark (without illumination) current of the nanostructure ZnO UV sensor was 6 × 10−10 A at 1 V.

Since the space-charge region width varies with the applied voltage, the illumination current density and the saturation dark current density are no longer independent of the voltage as is assumed for conventional solar cells.

From the photoelectrochemical results of the silicon wafer and 10% SiNWs, we can obviously draw the conclusion that in the illumination condition, the light current of the 10% SiNWs is higher than that of the silicon wafer (10% SiNWs, 0.35 mA; Si, 0.09 mA; with an applied voltage of 0.5 V).

The light current was measured under an illumination of air mass (AM) 1.5.

After turning off the illumination, the current declines quickly, and then the dark current slowly decreases with a long relaxation time, as shown in Fig. 2b.

From Figure 3a, under 365-nm UV illumination, the current of the PDs increases very slowly to reach saturation, and at turn off of the UV lamp, the current decreases also slowly.

It was seen that in both conditions (under dark as well as under UV illumination), the current decreases as the spacing between electrodes increases.

Under UV light illumination, the current is increased greatly, and the curve exhibits from asymmetrical to symmetrical nonlinear I-V behavior.

Etching speed can be controlled by adjusting both illumination (hole current) and biasing voltage, which allows creating modulated pore profiles [25].

When the electrode is exposed to the visible light illumination, the current presented an ascending tendency, and the CV curve of reverse scan section almost overlaps the curve under the visible light illumination.

As a result of the cone shaped illumination, the current density at the sample surface can be smaller compared to its value in the focused beam spot and surface damage can be reduced.