Sentence examples for identifying the faults from inspiring English sources

It is found that error codes identifying the faults are normally included with the description of the failed device.

In these types of networks routing of packets occurs in an infrastructure less network where identifying the faults and detecting is extremely difficult because of the infrastructure less distributed design.

The following experiments about rolling bearing faults are further verified its effectiveness in selecting the proper bandwidth and identifying the fault characteristics.

Four types of well logs, which are sensitive to the fractures, and a comprehensive discriminated parameter, named fault zone index are used in identifying the fault zone architecture.

In such case, identifying the fault in the original i.e.e

On the basis of this fact, an integral criterion identifying the fault direction is constructed.

Therefore, identifying the fault location using single-end information becomes a key technique.

Therefore, identifying the fault location using single-end information becomes a key technique.  .

Different fault resistances such as 0Ω, 20Ω, 40Ω, 60Ω and 80Ω were taken into consideration for identifying the fault, the faulty section and classification of fault.

This is followed by identifying the fault type and fault section by using A l and S l in the decision stage.

3) Because of only identifying the fault directions on both sides of HVDC line, so the pilot protection does not require the synchronous data.  .