Sentence examples for ideal value of the from inspiring English sources

It has an ideal value of 1 (and hence the ideal value of the tolerance factor is also 1).

Afforded in this experience of loving is access to the world of the other and the moral (or ideal) value of the other.

The quality rating Q n is calculated using the equation Q_{n} = 100,[(V_{n} - V_{i} )/(V_{text{s}} - V_{i} )]where V n is the actual amount of nth parameter present, V i is the ideal value of the parameter [V i  = 0, except for pH (V i  = 7) and DO (V i  = 14.6 mg/l)], V s is the standard permissible value for the nth water quality parameter.

The sub-index (Q i ) of the parameter is calculated by Qi = mathop sum limits_{i = 1}^{n} frac{{left{ {M_{i} left( - right)I_{i} } right}}}{{left( {S_{i} - I_{i} } right)}} ; times ;100, (2 where M i is the monitored value of heavy metal of the ith parameter, I i is the ideal value of the ith parameter, and S i is the standard value of the ith parameter.

The sub index (Q i ) of the parameter is calculated by Q_{i} = sumlimits_{i = 1}^{n} {frac{{{ M_{i},I_{i} } }}{{(S_{i} - I_{i} )}} times 100} (2)where, M i is the monitored value of heavy metal of ith parameter, I i is the ideal value of ith parameter, S i is the standard value of ith parameter.

The data are shown in Figure 7a, with the trend-line obtained in the same way using ideal values of the cell dimensions from the double-Einstein fitting described above.

The measured interplanar distances for the brighter particle are very close to 0.302 and 0.259 nm, which match well with the ideal values of the (220) and (311) planes for the inverse spinel cubic Fe3O4.

The ideal values of the calibration in the large and calibration slope are respectively 0 and 1. Since, standard performance measures ignore the clustered data structure, they can be considered as overall measures.

Substituting for in equation (10) and changing the mean bond-valence to its ideal value of, where is the valence of the cation and n its coordination number: Solution for the bond-valence parameters then follows the same procedure as for equation (10).

The results show that by increasing the flow passage length, the velocity of metal at the cross-section of sheath tends toward uniformity, the values of the bending angles of sheath gradually approach the ideal value of zero and the cross-section exhibits a better shape.

These results show that the expected slopes for all eight standards are close to the ideal value of 1.0 and the R2 values indicate good correlation of data across the defined linear ranges (R2 > 0.96, microarray; R2 > 0.99, RT-qPCR).