Sentence examples for id tube from inspiring English sources

Relatively limited experimental database is available on 19 mm ID tube.

This configuration was then scaled up 10 times in internal volume using a 2 mm ID tube.

Non-intrusive flow visualization using photochromic dye activation is applied to study the near-wall region around individual and coalescing pairs of Taylor bubbles rising in stagnant kerosene in a vertical 25.6 mm ID tube.

Therefore, in the present work, the experimental set-up is designed for studying flow boiling in 19 mm ID tube in such a way that any of the different flow regimes occurring in a steam generator tube (from pre-heating of sub-cooled water to dry-out) can be investigated by varying inlet conditions.

This paper presents an experimental investigation of the ester oil ISO VG10/refrigerant R134a mixture flashing flow in a 6.0 m long, 3.22 mm ID tube, which is one of the primary steps towards the construction of a methodology for the study of the lubrication and gas leakage in refrigeration compressors.

The model was tested with heat-transfer experiments for air/water flow in a 63.5-mm inside diameter (ID) tube.

Convective boiling of HCFC123 and FC72 in 0.19, 0.3 and 0.51 mm ID tubes is investigated.

Experimental results were obtained for horizontal 12.7 and 15.9 mm ID tubes without and with twisted-tape for twist-ratios of 3, 4, 9 and 14.

We found that placement of the intraluminal sensor significantly increased the pressure drop across the ETT (P < 0.05) for all sizes of ETT. Figure 1 shows the pressure-flow relationship of a 2-mm-ID tube.

At the beginning of the procedure we placed a 5 mm ID orotracheal tube by tube exchange with video-FBS assistance, as already described [ 3].

The rubber test lung was sealed in the glass chamber through one opening to simulate the lung and was connected to a Servo-I ventilator (Maquet Critical Care, Solna, Sweden) using an 8.0 ID endotracheal tube (LOT 1892776, Portex Tracheal Tube, Smiths Medical International Ltd., Keene, USA).