Since the process was done at ice temperature, some dyes were called ice colours.
In summer, gravity drainage of brine increases as the ice temperature and permeability increase.
Craig called Salt Lake City ideal because the humidity is low and the ice temperature can be kept to 21 or 22 degrees.
The anti-icing experiments demonstrate that the multi-layered coating not only realizes anti-icing with low-temperature (the anti-icing temperature was about 7 °C), but also possesses high-efficient electric heating and anti-icing performances.
First, the top surface ice temperature is a complicated field with frequent large variations in the ice temperature values.
During the dehydration process of using 100% acetone, cells were transferred from ice temperature to room temperature.
While the ice temperature field results in the largest NRMSE (see Fig. 19), it exhibits the lowest relative error.
Ice temperature is shown to be the single largest factor influencing borehole strength: strength increases with decreasing ice temperature, however complex factors such as the ice failure mode and ice consolidation also bear upon the relation.
The ambient temperature influences the ice temperature, which leads to a long desalination cycle and a low production efficiency.
When the release rate and ice temperature was high, the vaporization mass flux follows a decreasing trend.
The results indicated that the vaporization mass flux was a function of release rate and ice temperature.
