The results showed that the investigated slag contained several hydraulic phases, mainly in the form of calcium aluminates.
Synthetic zeolite was used due to their particular water adsorption properties and act as an artificial pozzolan promoting the development of hydraulic phases.
However, γ-C2S is a non-hydraulic phase.
In order to avoid this occurrence, engineers usually carry out pressure transient analysis in the hydraulic design phase of pipeline network systems.
Seventy-six percent of the water consumption during the hydraulic fracturing phase is direct water consumption for fracturing fluids, while the balance (24%) is indirect water consumption primarily for sand and additives production.
The rotary spool valves are rotated by the engine crankshaft while their phases are controlled by hydraulic or electric phase shifters.
This analytical modelling of the melting process can provide useful information for designing optimal electrothermal hydraulic microactuators using phase change materials (PCMs) and their operating actuation characteristics.
It was well established that the addition of Sr2+ cations to form solid solution with Ca7ZrAl6O18 can alter the hydraulic behaviour of this phase.
The nutrient removal process consisted of anaerobic, oxic, anoxic and oxic phases with hydraulic residence times (HRT) of 1/3/1/1 h and a settling phase of 0.75 h.
There is a lack of research for hydraulic behavior of two phase fluids in annular geometries.
During steam flushing, DNAPL mobilization occurs through a reduction in capillary forces at the condensation front and may become problematic if the recondensed organic liquid phase escapes hydraulic control and contaminates pristine regions of the subsurface.
