Sentence examples for hydraulic mode from inspiring English sources

A prototype piston-cylinder unit, covering a pressure range of 0.5 35 MPa in the hydraulic mode, and its assembly was designed and manufactured.

The design parameters of the reported constructed wetlands including the physical configuration, hydraulic mode, vegetation species, and targeting pharmaceuticals were summarized.

Current knowledge is limited on the removal efficiencies of pharmaceuticals in constructed wetlands, the removal mechanisms involved, the toxicity to constructed wetlands caused by pharmaceuticals, and the influences of certain important parameters (configuration design, hydraulic mode, temperature and seasonality, pH, oxygen and redox potential, etc).

This state can be attained by applying recycling hydraulic modes and special devices to maintain constant pH, or pH and concentration of the feed solution.

On top of this, it is clearly observed that at least two oscillatory modes exists in the system, the thermal-hydraulic mode (associated to density waves traveling thorough the core plus chimney section) and the so-called reactor mode (related to density waves travelling thorough the core).

In this paper, the theoretical and practical implications of changing the classic co-current hydraulic flow mode into a mixed flow mode are studied.

A co-current hydraulic flow mode of the salt solutions through the ED stack compartments is often applied.

A co-current hydraulic flow mode is common practice in ED but the approach can result in a high concentration difference between concentrate and diluate in the final stacks, which is disadvantageous.

If regulators allow the fossil fuel operation to move forward beyond exploratory well status and into actual hydraulic fracturing mode in his watershed, he will be out of business, and the local community and neighboring New York state will lose access to high-quality organic food.

Specifications of the stacks studied, rational hydraulic and electrical modes of testing are considered.

Due to the different modes of operation and hundreds of clients require different inlet pressure, a complicated hydraulic model is developed by means of AFT Fathom 9.0 in this study to perform the hydraulic analysis on CCWS-2B.