Sentence examples for hydraulic material from inspiring English sources

The hydraulic material release gate can be positioned essentially anywhere along the test section and is capable of nearly instantaneous removal (for a simulation of dam breaks) as well as following a detailed prescribed removal to simulate material slumps.

Using a hydraulic material testing system (MTS), eight samples of each tape were compared in three different mechanical tests: load-to-failure, fatigue testing under load control, and fatigue testing under displacement control.

This material didn't include non-hydraulic binding material and hydraulic material, thus this building material had low strength and poor weathering resistance.

When ginger nut and Aga soil are calcined at a high temperature, both the hydraulic material CaO and nonhydraulic material β-CaSiO3 and Ca2Al2SiO7 will be produced.

(3) The slower early strength development followed by higher strength development is characteristic of the MSWI BA containing a latent hydraulic material.

ZAS3 antibodies have been described [4], and other antibodies were purchased from Santa Cruz Biotechnology, CA. Biomechanical properties of femurs were evaluated by three-point bending test on a servo hydraulic material test frame using an MTS 858 Bionix Testing Machine (MTS Systems Corporation, MN) at 1 mm/min with continuous recording of load until failure.

In Greece a variety of pozzolanic and/or hydraulic materials are used as cement main constituents.

Eighteen cadaveric shoulders were dissected and tested in a specially designed rig, driven by a hydraulic materials testing machine.

By controlling the calcining temperature and selecting ginger nut and Aga soil with proper amounts of clay and SiO2, binding materials which contain non-hydraulic material CaO and hydraulic materials β-CaSiO3 and Ca2Al2SiO7 in various ratios can be made.

The above research proves that ginger nut from Qin'an Dadiwan of Gansu and Aga soil from Shan'nan in Tibet are calcined for three hours at eight temperatures from 700°C to 1400°C, and their products non-hydraulic material CaO and hydraulic materials β-CaSiO3 and Ca2Al2SiO7 change regularly in ratio.

The following conclusions can be reached through the above tests and discussion: (1) By controlling the calcining temperature and selecting ginger nut and Aga soil with proper amounts of clay and SiO2, binding materials which contain non-hydraulic material CaO and hydraulic materials β-CaSiO3 and Ca2Al2SiO7 in various ratios can be made.