Sentence examples for hot vacuum from inspiring English sources

Installation for hot vacuum pressing, designed and patented by the authors, was done to consolidate the powders.

Such star matter is so tenuous that Betelgeuse has often been called a "red-hot vacuum".

When the machine is in operation, hot wall (vacuum vessel wall is around 100 °C and first wall is around 150 °C) and cold wall (vacuum vessel wall and first wall is in normal equilibrium temperature) are both considered.

It was further dried in hot air vacuum oven at 50 °C to brown powder (100 g) The brown powder was suspended in water (70 mL) and fractionated into chloroform soluble fraction by extraction with chloroform (5 × 250 mL) in a separating funnel.

Nano-sized TiCx/2009Al composites with 10 30 vol.% TiCx were fabricated via combustion synthesis combined with vacuum hot pressing followed by hot extrusion.

The NACs with four volume fractions (10%, 20 %, 30 % and 40 were successfully fabricated by vacuum hot pressing followed by hot rolling (VPHR) in atmospheric environments.

Based on this proposed approach, B4C/6061Al composite plates with different B4C content (10 wt%, 20 wt%, 30 wt%) were successfully fabricated using vacuum hot pressing followed by hot-extrusion.

1. Powder metallurgy techniques (vacuum hot-pressing and hot isostatic pressing) can successfully be applied to synthesize Cu/Ti3SiC2/C nanocomposites reinforced with MWCNTs and graphene.

Cu/Ti3SiC2/C/Graphene naocomposite materials reinforced with graphene have been fabricated by vacuum hot-pressing sintering and hot isostatic pressing.

In this work, Cu/Ti3SiC2/C composites with both MWCNTs and graphene were prepared by mechanical alloying, vacuum hot-pressing (VHP), and hot isostatic pressing (HIP) techniques.

Originally executed with heated irons as in the glue-paste method, it increased in popularity by the introduction, around 1950, of the so-called "vacuum hot table".