Sentence examples for hot leg flow from inspiring English sources

The void distribution in a hot leg, flow regime and natural circulation rate were measured in detail for various conditions.

A large azimuthal angle from a cold leg to a hot leg needs to avoid a high suction flow zone when an ECC water is being injected.

Moreover, the maximum critical depth (56 cm) is less than the diameter of the hot leg (78.74 cm) at an injected coolant mass flow of 400 kg/s, and with diameter of 4 in (10.16 cm) as the design diameter of the injection pipe in US-APWR Mitsubishi Reactor; such result assure that there is no flow blockage in the hot leg yet.

The model was used to study the factors affecting the initial Froude number, the location of the occurrence of the hydraulic jump, and the critical coolant flow depth during circular horizontal hot leg injection in US-APWR Mitsubishi Reactor.

The major flow path from the clod leg to hot leg was preserved with a principle of similarity.

It turned out that the inlet geometry affected the flow regime at the inlet of the hot leg, namely the void distribution in the hot leg.

The loop design was based on the scaling criteria developed under this program and a horizontal section was inserted between the gas injector and the hot leg in order to investigate the effect of the vapor phase inlet section on the flow regimes and flow interruption.

Hot Leg, Hawkins' new "Man Rock" quartet, are the Darkness-plus.

The flow zone around a broken cold leg in the downcomer annulus has the role of a high ECC direct bypass due to a strong suction force while the wake zone of a hot leg has the role of an ECC penetration.

Hot leg riser and downcomers are treated as first-order lags.

Finally, the hot leg riser and downcomer regions are expressed by first-order lags.