Sentence examples for hot curing from inspiring English sources
Hot curing one-part adhesives are often used to bond car body shells.
The adhesive used was a warm to hot curing epoxy system (Araldite LY 1564 SP/Aradur 3487 BD) manufactured by Huntsman.
In the hardened state, when CE films do not prevent evaporation at the tile mortar interface, adhesion in hot curing conditions is lowered compared to dry tensile adhesion values.
It is also interesting that a greater slope at the ascending branch of the temperature rise curve was observed at the central portion compared to the surface portion under the cold curing condition, whereas this trend was reversed under the hot curing condition.
The results demonstrate that compressive strength values of about 196 and 182 MPa after two days of hot curing can be achieved when replacing 50% and 100% of QS with GS, respectively, compared to 204 MPa for reference UHPC containing 100% QS.
The experiments were performed with a film adhesive FM® 73 (hot-curing), a fracture tough adhesive often used in bonded repairs [10].
Cold processing takes weeks to cure, while hot process cures quickly since it is heated or cooked while mixing.
Mortars containing GGBFS in binder had higher enhancement on compressive strength under early hot water curing.
The chloride permeability of binary blended concrete containing SF was less affected by hot weather curing.
porous (30% voids) unplasticized PVC particles at low temperatures followed by hot press curing.
The effect of hot air curing on strength development of RPC at different temperatures and durations are studied in detail.
