Sentence examples for hole width from inspiring English sources
Anisotropically ordered patterned surfaces of alternating ridges and grooves and isotropic holed surfaces of varying pitch (pitch = ridge or hole width + intervening groove or planar regions) were fabricated and seeded with HAECs.
The design variables are suction coefficient, hole width, hole position and hole spacing.
Digital phantom studies were also performed to validate the system with the optimal square-hole collimator (23 mm hole length, 1.28 mm hole width, and 0.32 mm septal thickness) in terms of contrast, contrast-to-noise ratio and recovery ratio.
After ta = 1,800 s, the hole width has been substantially increased by thermal etching.
Interestingly, the closing starts along the [1 10] direction, whereas the hole width does not change in the [110] direction.
Figure 5 MNHS with microcavities having a hole width of 200 μm and distance between cavities of 200 μm: (a, b) acetone-mediated MNHS.
They showed that the controlled placement of spherical particles can be achieved by choosing appropriate spin speed, the pH, and the geometries of grooves and holes (width, depth, diameter, and the sidewall slope).
The optimized hole-width of the LISTTM arrays was approximately one half of the designed wavelength.
The tone of a pipe is determined by many factors, including the pressure of the wind supply, the size of the foot hole, the width of the flue, the height and width of the mouth, and the scale, or the diameter of the pipe relative to its speaking length.
A threatening note with a racial epithet and a hole the width of a bullet was left on his bunk.
In Portugal, biologists studying the Eurasian lynx outfit a lynx den with cork in which an Amazonian kissing bug is contained in a hole the width of a quarter, covered by thin plastic.
