Sentence examples for highly wet from inspiring English sources

For motility measurement, highly wet substrate is required and agar was added to LB medium at 3 g/liter (swimming medium).

Note that this analysis is very approximate since the maximum superheats for the highly wetting nanofluid surfaces are under 50°C, while the prediction for homogenous nucleation of water at atmospheric pressure is approximately 220°C.

Extremely wet.

The PEC etching in hydrofluoric (HF) acid solution, which is a highly anisotropic wet etching process, has traditionally been used for fabrication of microstructures in silicon substrates with aspect ratios over 10 1 and often 100 1.

The curves of tensile strength and tensile strength relative to dry weight are shown in Figures 8 and 9. BNC looks like a hydrogel, and it is soft and easily deformed, which means that it is not easy to measure the accurate size of BNC tube when it is in a highly swollen wet state.

The simulation demonstrated the development of a highly heterogeneous wetting front, and of preferred wetting pathways that were perturbed by inertial retardation.

Laboratory diagnostic algorithms changed considerably over the study period, particularly from the mid-1990s onwhens whighly-sensitivetive single and multiplex PCR assays began to replace highly-specific wet mount and Gram stain microscopy and bacteriological culture as primary diagnostic tools for gonorrhoea and trichomonas (Table S1).

At 33% pore volume initial water saturation, in a highly water-wet plug, and at 15% pore volume initial water, in a less water-wet plug, no water front was observed; the oil saturation uniformly decreased everywhere in the core during imbibition.

For the rock first evaluated with CSW, the I A_H was −0.1373 indicating neutral wettability, while for the rock first evaluated with CFW the I A_H was −0.6184 indicating a highly oil-wet condition.

However, use of this form and also the geometric mean of Ma et al. (1997) do not respond when viscosity of the nonwetting phase becomes relatively small (as with air, or with a highly viscous wetting phase, for example) (Fischer et al. 2008; Mason et al. 2010).

The composite reinforced by multiscale TiO2-CF is highly promising for wet friction material.