Sentence examples for highest water depth from inspiring English sources

In the case of the highest water depth h = 0.615 m, non-breaking wave conditions occurred for two smallest wave heights (H i,nom = 0.04, 0.08 m).

Reduction of forces exerted by solitary waves on single mangrove models for forest width B = 0.75 m: (a) for the lowest water depth h = 0.465 m, (b) for the highest water depth h = 0.615 m.

The measurements have added to the range with the highest water depths and wave heights presented in the literature so far.

The combination of high levels of suspended solids and high water depth reduces the light available to the SAV, which then reduces the SAV growth.

Tiwari and Tiwari (2007) found that lower water depth such as 0.02 0.04 m has higher annual efficiency up to 44% compared to higher water depth such as 0.18 m.

Therefore, it is believed that ASR wells can help SAV growth by maintaining higher water depth, when the lake stage is too low for optimum SAV growth (Jin et al., [2011]).

Hence, from the mentioned observations, it is clear that the optimum control in peak acceleration for a particular frequency ratio is obtained with higher water depth ratios, and maximum reduction in response is obtained when the frequency ratio becomes unity.

Modeling of potential respiration at the same site suggested that sites of high activity were found in areas of lower connectivity if connected during higher discharges and areas of high water depth (Tritthart et al., 2011).

Hot spots of potential microbial respiration were found in areas of lower connectivity if connected during higher discharges and areas of high water depths.

However, it does show that a greater yield per unit area - in this case, 20.6 kg of fresh mass per square meter - is possible for these aquatic plants with higher water depths.

However, at higher water-depth ratios, due to higher liquid sloshing phenomena in the STLD compared with the other one, STLD is more effective.