Sentence examples for highest torque was from inspiring English sources

The angle at which the highest torque was achieved was defined as the optimal joint angle at which all subsequent measurements were made.

Maximal voluntary isometric forces of the knee extensors of the right limb were measured on a custom built dynamometer (VU University Amsterdam, The Netherlands) at a knee angle of 120° (180° corresponds with fully extended knee), at which angle usually the highest torque is produced (de Ruiter et al. 2004).

High torque was correlated with high cyclindricity values indicating problems with chip evacuation.

Between two wood chip grades, a twice as high torque was recorded, while a third grade could not be fed due to jamming.

A biliary manipulation catheter (Cook, Brisbane, Australia) with a very short distal bend and high torque was then used with the guidewire to negotiate the bowel lumen.

The application is a torque motor where low speed and high torque are main requirements.

Low speed but high torque are characteristic of boring because the boring tool has a larger radius than a drill.

A high torque is necessary in order to avoid stalling, and a high enough RPM is required to prevent the motor speed from saturating during normal balancing behavior.

When higher torque is required, as, for example, in the starter motor of an automobile, stronger magnets such as neodymium-iron-boron may be employed.

The higher torque is associated with more uniformity of mixture (0.8484) and pressure peak (13.98 MPa) that is plausible with a fitted spray injection with chamber walls coordination, reducing the spray-wall impingement.

This suggests a higher torque is applied when half pins are secured with bolts.