Your English writing platform
Discover LudwigExact(1)
For the G50 mixture, which was stored at an ambient temperature of 20 °C, higher core strengths compared to cylinder strengths were obtained throughout the testing ages, showing the highest strength for the core drilled from the middle-center region of the wall, as given in Table 5.
Similar(59)
This gear also had higher strength for tooth bending loads.
Therefore, development of new in situ cross-linking polymer gel with low cost and high strength for conformance control is very significant.
Lower w/b ratio resulted in higher strength for corresponding specimens that were exposed inside and outside of the sulfate solutions.
The results showed more shrinkage, higher restraint stresses, and higher strength for the calcium nitrate-based accelerator mixture.
AHNS show an even higher strength for the solution annealed state, which can be increased further by cold working.
This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation.
Spherical dome roofs are widely used on large diameter tanks and silos, as they provide high strength for very limited amounts of material: buckling normally controls the design.
The EP resin resulted in a comparable bond strength to conventional epoxy when used in wet layup, with a 7% higher strength for CFRP, reaching 4.2 MPa, and 17% lower strength for GFRP, reaching 2.8 MPa.
The findings indicate how the modification of some morphological features, which depend on the careful selection of appropriate and specific processing parameters, would enable the production of ceramic foams possessing higher strength for a given total porosity value.
You could be using too much gel, so try less gel or upgrade to a higher strength for the same amount of hold.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com