Your English writing platform
Discover LudwigExact(4)
This pulsar has the highest rotational speed of any known pulsar, 642 rotations per second.
However, when using software triggering of the spectrometer with an integration that is long enough for whole rotation of rotor even at the highest rotational speed, the timing of the spectrometer triggering with respect to the turning rotor can not be determined anymore in contrast to hardware triggering.
Decreasing the crank pin diameter of about 15 % may leads to a reduction of power losses up to 18%% at low motor rating and 8%% for the highest rotational speed.
The following specification was achieved: the turning accuracy of the spindle of the workpiece is 0.05 μm, the highest rotational speed of the grinder is 80,000 rpm and its turning accuracy is 0.1 μm, the resolution of the linear displacement of the transverse and longitudinal guideway is 4.9 nm, and the adjusting accuracy of the precise adjusting mechanism is 0.1 μm.
Similar(56)
The peak frequency can be an important noise source when the fans are rotated with a high rotational speed.
The designed driving system sustains stable levitation during the rotation of the rotor and achieves higher rotational speed than that of the torque driver.
In contrary, for the turbine with less blade number, it is possible to obtain a relatively more moderate attack angle at the high rotational speed, to allow the turbine obtaining the high lift coefficient at the high rotation speed.
However, at a high rotational speed, cavity was even created.
The high rotational speed of aircraft turbines required special gearing to drive electric generators.
It has no wear, very low friction and allows operation at high rotational speed.
They provide low frictional losses, no wear and allow operation at high rotational speed without lubrication.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com