Sentence examples for highest removal at from inspiring English sources

In contrast, LVN63 obtained the highest removal at 0.22 g/L of ammonium tartrate; this behavior was also detected in Novacron Red.

Carbon oxygen demand was the parameters with the highest removal at 89.74% (initial concentration: 593.5 mg/L) followed by nitrate (75%) and phosphate (13.81%).

Hardness removal efficiency was observed to be 93% at pH 7 with 1-mg/l concentration by alum, whereas chitin was stable at all the pH ranges showing the highest removal at 1 and 1.5mg/l with pH 7. In conclusion, using natural coagulants results in considerable savings in chemicals and sludge handling cost may be achieved.

The higher removal at higher adsorbent dose was expected as seen in case of initial concentration of 15 mg/L.

Removal efficiency of 74.8% was observed at pH 2, while pH at 4.2 resulted in higher removal at 87.2%.

Firstly, the higher removal at lower concentration by carbonized biomass indicates that the process is adsorption rate controlled rather than mass transfer rate controlled.

When it comes to determining the optimum coagulant, ferric chloride had the highest removal also at the highest current density (31.15 A/m2), along with having the highest dose (15 mg/L).

The results indicated that the highest removal was acquired at a temperature of 30 °C (Fig. 9).

For As V) the highest removal was observed at pH 8 (Fig. 5).

From Fig. 1a, b, it was evident that the phycoremediation % of both As III) and As V) were higher in basic media than in acidic media and the highest removal was found at pH 9.0.

The highest removal efficiency was achieved at pH 2.0 in the adsorption.