Sentence examples for highest peak strength from inspiring English sources

Jeff Sonas, the author of the website "Chessmetrics", rates Alekhine as the sixth highest peak strength, relative to other players of the same era, of all-time on the basis of comparable ratings.

(2) Agglomerated two-layer graphenes do not possess an increased value in the peak strength compared with single-layer graphene-reinforced polymer nanocomposite (PNC), while two separate layers of graphene show slightly higher peak strength.

Failure indicated by a strain-softening response following the higher peak strength due to shearing and tearing at columnar boundaries of Cr was observed in the nanolayered films at 25 °C and 100 °C.

Barton et al. (1985) have identified variabilities by more than 50%% by direct shear test with smaller sample sizes involving considerably higher peak strength than larger samples.

In the four-point bending tests, the sandwich panels with HPEPC cores, or reinforced UHPC face sheets combined with adhesive mortar, exhibited higher peak strengths than the other specimens, and failed in a stable manner, without delamination.

In the flatwise and edgewise compression tests, sandwich panels with HPEPC cores had high peak strengths, irrespective of the type of face sheets, as opposed to the specimens with EPS mortar cores.

However, when the moisture content is high, a peak strength appears on the strength strain rate curve.

The low relative density hollow truss structures reported here have the highest reported specific peak strength of any cellular metal reported to date.

Hybrid strengthening resulted in the best performance with highest increase in peak strength at both a/d ratios without a significant reduction in the ultimate displacement.

Furthermore, the higher the striking velocity of a given projectile, the higher is the peak strength of the sand sample.

The higher peak shear strength and lower hydraulic conductivity of the waste samples were attributed to this effect.