Sentence examples for highest open circuit from inspiring English sources

Polymeric solar cell devices based on these copolymers as donors and PC71BM as acceptor showed the highest open circuit voltage of 0.95 V and power conversion efficiency of 2.68% under the illumination of AM 1.5, 100 mW/cm2.

These new designs have been tested with well researched materials, GaAs/AlGaAs, and highest open circuit voltages of 1170 mV and fill factors of ∼0.85 values were produced for initial growths and fabrications.

Results showed that the addition of Mn, Fe, Co and Ni to AAPyr increased the performances compared to AC. Fe-AAPyr showed the highest open circuit potential (OCP) that was 0.307 ± 0.001 V (vs. Ag/AgCl) and the highest electrocatalytic activity at pH 7.5.

For the mono-layer, we observed the highest open circuit photo induced voltage of about 9.25 mV (without any applied bias).

The highest open circuit voltage (V oc = 0.549 V) and short circuit current density (J sc = 0.592 mA/cm2) were obtained from the DSSCs sensitized by the acidified ethanol extracts of Bougainvillea spectabilis bracts and Euphorbia cotinifolia leaves, respectively.

The highest open circuit voltage (V oc = 0.549 V) and short circuit current density (J sc = 0.592 mA/cm2) were obtained from the DSSCs assembled by natural dye extracted with the acidified ethanol of Bougainvillea spectabilis bracts and the leaves of Euphorbia cotinifolia, respectively.

The electron collecting efficiency was improved significantly, resulting in high open circuit voltage.

Better ion diffusion performance contributed to a higher open circuit voltage.

The MFC generated a high open circuit potential (∼0.75 V) and maximum power density (∼2496 mW/m2).

All photovoltaic devices featured high open circuit voltages (Voc, 0.72 0.91 V).

Prospectively high open circuit voltages (Vocs) of the devices based on the four polymers were accomplished.