Sentence examples for highest layer thickness from inspiring English sources

Shells implanted with the optimum nucleus diameter and number of pearls produced the highest layer thickness of 17 μm after 9 months cultivation.

The multilayered TiAlN/ZrN coating with the lowest modulation period (25 nm) and the highest layer thickness ratio of TiAlN/ZrN (0.92) exhibited the best impact resistance (higher than 1 × 105 impacts) and the highest H3/E⁎2 ratio value of 0.443 GPa, indicating the best resistance to plastic deformation, among the studied TiAlN, ZrN and multilayered TiAlN/ZrN coatings.

The lamina propria showed highest layer thickness and lowest densities of nerve fibres, glia, and smooth muscle tissue in the dilated portion itself.

Spectral performance of designs with higher layer thickness error tolerance coincides better with the theoretical spectra.

In overwetted process conditions a higher layer thickness at the centre band edges could be observed.

Additionally, we found supporting evidence in the reports on planar heterojunction devices that employed higher layer thicknesses in the range of 0.4 0.8 μm for fabricating highly efficient devices.

The results on the layer thicknesses obtained by AFM method differ from those by RBS significantly, the differences being due to different principles of both methods, namely, in contrast to the RBS results, the AFM method gives higher layer thicknesses on the glass substrate than on the silicon substrate.

The remaining charge finally causes low-stretched nanofiber and higher fiber diameter for higher nanofiber layer thickness [54].

The possible residual charge storage generation mechanism, namely, ionization based on modified Panchen law, is introduced in the paper, which shows good agreement with experimental results at higher dielectric layer thickness.

The lower level of solution should be as high as layer thickness of solution on the spinneret and increase the possibility of electrical discharge during electrospinning.

RESULTS Microperimetric sensitivity was 0.29 dB (95% confidence interval [CI] = -0.38 to -0.20 dB, P < 0.001) and 0.13 dB (95% CI = -0.22 to -0.03 dB, P = 0.008) lower in each sector for every 10-μm higher RPEDC layer thickness and 1-HF present, but was not associated with the AxD score or the number of atrophic areas present (P ≤ 0.464).