Sentence examples for highest hardness was from inspiring English sources
The highest hardness was obtained for the Cr3C2 coatings (22 GPa) while the amorphous carbide showed the lowest hardness (10 GPa) and friction coefficient.
It was seen that the surface hardness increased about two times depending on process parameters, and the highest hardness was observed on austenite layer obtained at austenitic treatment (640 °C).
The hardness for all multilayer periods was higher than the calculated value from rule of mixture and the highest hardness was attained at the coating with the smallest multilayer period.
Values of t8/5, Ms, Ac1, Ac3, and highest hardness were calculated according to the methods described below.
The highest hardness is obtained in the case of SiCNH coating deposition process, preceded by the process of surface modification in plasma conditions, provided for N2 only (hardness 10.0 GPa) of the N2/H2 mixture (flow ratio 3/1, hardness 10.5 GPa).
All the CrAlN nanocomposite films with the highest hardness being approximately 33.4 GPa exhibited much higher hardness and better wear resistance than traditional CrN films The excellent anti-wear performance of CrAlN nanocomposite films can be attributed to an amorphous/crystalline nanocomposite micro-structure and their high hardness.
After post-aging, the α″-Fe16N2 phase which has high hardness was formed by decomposing the compound layer.
Graphite-like carbon (GLC) films with high hardness was successfully deposited on above different ceramics to improve their durability and stability under different working conditions.
