Sentence examples for highest gauge from inspiring English sources

UHPFRCs showed the highest gauge factor (433) until the first cracking point, whereas the SH-SFRCs with a 152 MPa compressive mortar matrix showed the highest gauge factor (73.7) within the strain-hardening region.

The highest gauge factor at higher temperatures (GF = 7.2 at 250 °C) was observed for moderate doping level (boron to carbon ratio of 3000 ppm).

The unintended noise in the FCR of the plain UHPC was largely mitigated by adding the steel fibers, while the highest gauge factor (GF) under tensile load was found for the plain UHPC with CNTs.

Dependence of the piezoresistive gauge factor of DLC:Ag films on the substrate bias was resonance type with the highest gauge factor values observed in 50 100 V negative voltages range.

All the SH-SFRCs investigated had nominal gauge factors ranging between 50 and 140; these values are much higher than the commercially conventional gauge factor, which involves metal and is around 2. Both T30/0.3 and T20/0.2 produced the highest gauge factor, i.e., the best damage-sensing capacity, whereas S13/0.2 produced the highest electrical conductivity.

The highest gauge you should be worried about using for this project is 16 gauge.

This finding allowed for the achievement of a high gauge factor of ∼112.

Contrary to what may be conventional wisdom, the higher gauge number indicates a thinner wire, and the smaller gauge number indicates a thicker wire and heavy-duty cord.

These novel designs featuring interlocked geometry and covalent bonding allow the hybrid sponges to act as strain-gauge sensors with high gauge factor (1.4) and excellent stability.

A CNT-PDMS composite with high conductivity and a high gauge factor was obtained by increasing the CNT concentration in PDMS.

These results were in agreement with the experimental ones, and a high gauge factor can be obtained with low metal concentration or increase in size of metal cluster.