Your English writing platform
Discover LudwigSuggestions(2)
Exact(1)
The results show that the membrane with flat polymer composite design revealed the highest deflection of 9.16 μm at 6vol% particle density while the embossed composite membrane design achieved the highest deflection of 8.14 μm at 25vol% particle density for an applied magnetic field density of only 0.98 mT.
Similar(59)
After Mats Sundin's backhander tied it, Clark put the Maple Leafs ahead with a waist-high deflection of Tomas Kaberle's shot.
The limb should be lightweight and permit a high deflection of the beam's tip in order to achieve a good ballistic performance.
The stiffening effect caused by higher deflection of the wires acted as an opposing force and might be the reason for the higher axial loading needed to achieve osteotomy contact in indirect loading.
The proximal bone fragment in indirect loading covered the whole defect size of 3.5 mm, thereby resulting in a higher deflection of the proximal wires compared to direct loading.
Steel corrosion may also cause the occurrence of high deflection or instability of the structure itself.
Tensile preloading was found to reduce the extent of delaminations, while compressive preload led to an increased extent of delaminations resulting from a higher bending deflection of the plate under impact.
The causes of high deflection under elevated water and earth pressure and local buckling incidents are investigated by the finite element method.
Despite the fewer grids of cracks noticed, the honey-combed beam exhibits higher deflection values.
As slow waves of this magnitude mask the polarity of higher frequency deflections of the auditory response when plotted as either dynamic scalp bands or topographic maps, these plots are omitted for infants.
At termination of the tests, the beams reached very high deflections (about span/5), even then failure of the assemblies always occurred in the joints.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com