Sentence examples for highest compressive stress from inspiring English sources

For the CoCr implant, the highest compressive stress was 23.8 MPa, at toe-off, whilst PEEK generated the highest compressive stress of 15.6 MPa at mid-stance.

However, the CrTiAlN coating encountered circumferential cracks and premature delamination (Adhesive energy Gc = 70 J/m2) because of its highest compressive stress (4.64 GPa).

A maximum hardness H = 42.1 GPa and elastic modulus E = 362 GPa is reached for the NbC1.44 N0.44 film, which also exhibits the highest compressive stress of 6.1 GPa and the highest H3/E2 value, yielding the best wear resistance.

The near-substrate TiN sublayer shows the highest compressive stress reaching ∼ −1.8 GPa, a unique texture and the largest density of defects among all sublayers, which indicates diverse nucleation mechanisms of TiN on the native Si oxide and on the SiOx sublayers.

In several days, the surfaces of the Sn Cu deposits, which have the highest compressive stress, develop 50 μm contorted hillocks and 200 μm whiskers, pure Sn deposits develop 20 μm compact conical hillocks, and Sn Pb deposits, which have the lowest compressive stress, remain unchanged.

Where for the Puddu plates, the highest (compressive) stresses were acting at the bone-plate contact point between the upper tibial fragment and the plate insert, for the TomoFix plates the highest (compressive) stresses acted in the conjunction between the tibial fragments (Table  1).

In a compression test the surface is closed under high compressive stress, thus repeatedly blocking the process, but in a tension test the surface separates more easily, causing loss of plastic stability.

Dark blue areas show areas of high compressive stress.

This up shift evidences that FLGs experience a high compressive stress.

Naturally, in both conventional hyrax simulations, these areas manifested high compressive stress levels.

High compressive stress concentrations are found to exist at the four square corners.