Sentence examples for highest cell voltage from inspiring English sources

It was shown that for a fixed flow rate of sulfuric acid solution (5 ml/min), at 0.1 A/cm2, the Nafion® 115 based FE-DMFC operating at 1 M yields the highest cell voltage (0.38 V).

On average, approximately 4-mV higher cell voltage is seen with the digester gas.

Therefore, a better power capability and energy density on supercapacitors can be achieved through a high cell voltage.

IEM for C/A electrolysis showed high cell voltage (over 2.2 V) but low O2 impurity in H2 gas.

In addition, the more hydrated membrane and the rising cell temperature greatly lower the membrane resistance, thus giving rise to higher cell voltage.

These results suggest that low-cost separators could be used for field applications of MFCs for higher cell voltage while minimizing oxygen diffusion.

Moreover, a higher cell voltage can be realized if the cell is operated under pressurized conditions or by replacing air with O2.

The particle sizes of the obtained carbon ranged from av. 2 μm to 50 nm, and smaller particles were obtained at higher cell voltage and lower electrolysis temperature.

Besides increasing capacity, a high cell voltage resulting from a high (cathode) and low (anode) standard redox potential of the respective electrode redox reaction can also greatly improve the energy density of LIB.

Due to the high specific capacitance and high cell voltage, the as-prepared asymmetric supercapacitor exhibited a high energy density of 32.7 Wh kg−1 at 71.5 W kg−1 and 25.5 Wh kg−1 at 1.28 kW kg−1.

On the other hand, the LNF-0.7//AC supercapacitor is operated reversibly at a high cell voltage of 2.0 V and exhibits a high energy density of 27.7 withg−1 with a low power density of 500 W·kg−1.