Sentence examples for highest axial force from inspiring English sources

The highest axial force ratio caused drift capacity to be reduced from 2.5%to2.0%0%.

Figure 2c e indicate that, even at the highest axial force, complete MN failure was not observed, indicating residual viscoelasticity, despite the relatively high glass-transition temperature (Tg) of this material (55.82 ± 0.97 °C).

Also, they observed that high axial force improves tensile strength and strain of welds.

For a low axial force, changes in the surface roughness caused significant changes in the leakage; the same was not observed for a high axial force.

The Wells turbine has inherent disadvantages; lower efficiency, poorer starting characteristics, higher axial force and low tangential force in comparison with conventional turbines.

Angle members are widely used in light-weight steel skeletons and they are commonly subject to high axial force with eccentricity.

They found that high axial force promotes the squeeze of the molten polymeric material, preventing introduction of air into the weld and helps cooling of the weld, avoiding shrinkage, and voids formation.

According to the results of the theoretical analysis, there are some conclusions as followings: (1) a lower axial force is resulted because of the delay of installing rock bolt and its supporting effect may be reduced; (2) the larger displacement is caused by the lower deformation modulus of the rock mass, and a higher axial force is resulted in the rock bolt.

Although this approach produces very high force sensitivity in directions that are perpendicular to the tool shaft (lateral directions), the axial rigidity of both the tool and fibers makes achieving high axial force sensitivity with FBG sensors a challenging problem.

When extremely high axial forces need to be safely controlled by workpiece clamping, surface damage (clamping marks) is often inevitable.

A series of quasi-static tests were performed to examine the behavior of the ST-RC walls when subjected to high axial forces and lateral cyclic loads.