Sentence examples for highest applied stress from inspiring English sources

At the highest applied stress intensity of 35 MPa m1/2, large tensile strains are measured ahead of the crack tip and considerable elastic anisotropy is observed.

The nature of the reactions requiring high applied stress for breakaway is identified.

The cracks of both shot-peened and shot-peened carburized specimens initiated on the surface at higher applied stress levels.

The samples treated at low applied stress appear almost free of dislocations, whereas samples sintered at high applied stress present a high dislocation density, forming sub-grain boundaries.

Long-term creep tests confirmed the stress concentration eventually induced the decrease in creep resistance for nanocomposite at a high applied stress levels.

Further, the plasticity effect is also induced in presence of high applied stress which may lead to local yielding of the hole boundary.

An increased fracture surface roughness, which has frequently been reported by other researchers, is also observed in the present studies under a high applied stress.

If the decrease in the local stress ratio at the notch root for high applied stress ratio is accounted for in the analysis, trends independent of applied stress ratio were found in the calculated critical distances.

In summary, AFRPs demonstrated enhanced durability at high applied stress amplitudes compared to human AF and withstood radially-directed biaxial stresses commonly borne by the native tissue prior to failure/detachment from IVDs.

The Ultra SCS-6/Ti 24Al 17Nb 2.3Mo SCS-6/Ti 24Al 17Nb 2.3Mot fatigue lives for the lowest applied stress levels, and the Ultra SCS-6/Ti–24Al–17Nb–0.66MMCMMC exhibited the longest fatigue lives for mosthef the higher applowesttress levels.

The k33 coefficient decreases rapidly to a low level as the sample is loaded cyclically with a high applied stress, while the k33 value decreases slowly or does not change when loaded with a low applied stress.