Sentence examples for highest applied load from inspiring English sources

In the case of the highest applied load, delamination was the main wear mechanism observed in the tested samples.

It is suggested that the grinding direction could be optimized to give compressive stresses in the direction of the highest applied load and thus reduce the risk for stress corrosion cracking.

The measured and simulated stress contours were shown to be in good agreement except at the highest applied load, at which stress relaxation at the notch tip was observed in the experimental data.

This was found to be in contrast to strain paths where ∊TD/∊RD≪1.5, demonstrating that lattice strain magnitudes remain highest in the direction parallel to the tensile axis with the highest applied load.

To predict the fatigue life of motor-generator rotor in a pumped-storage plant, the most dangerous position of the rotor under the highest applied load was found to be at the dovetail of magnetic pole and yoke after failure analysis and stress condition analysis.

At the highest applied loads, damage appeared as a combination of macro-cracking and micro-spalling.

The thick coating is completely removed during scratch testing at high applied load.

The results showed that there was a higher degree of plastic deformation at a higher applied load, as shown in the inset of Figure 1.

Due to the high applied load amplitudes considerable cyclic plastic deformation occurred especially ahead of the crack front.

High applied load does not lead to complete coating removal, but pieces of coating are squeezed into the substrate.

The results showed that the texture surface with the high dimple density had low friction at low and high applied load under dry friction.