Sentence examples for higher friction force from inspiring English sources

Both types of coated samples exhibited slightly higher friction force than that experienced by the uncoated specimens.

We therefore claim that it is the higher friction force that results in the higher degree of graphitization, which subverts the concept of a higher degree of graphitization leading to a lower friction coefficient.

Therefore, as the sintering temperature increased, the clusters were connected more strongly, and hence, the surface area between the Ag nanopaste and the Si substrate increased, resulting in the higher friction force.

Between the two types of titanium samples, bare TiG2 showed higher friction forces and wear rates, but this trend was reversed after laser nitriding treatments.

After dissolution of bulk copper clusters deposited on Au(1 1 1) we observed an area with higher friction forces due to the formation of an alloy between gold and copper.

Moreover, high friction force increases the heat generation and lead to thermal damage in the surface layer of the ground work.

The measured periodicity between areas of high friction force was nearly 0.5 nm, which was in agreement with the expected interval periodicity of 0.52 nm. Figure 5 Original images (a) and filtered images (b) of AFM and FFM images of muscovite.

Their skin is constantly exposed to high friction forces, which promotes abrasion.

It would, however, only be applicable to solid, well adhering, and flat samples because high friction forces are unavoidable.

The high-friction force created by the locking taper breaks down the titanium oxide layer, and the metals become fused together in a cold weld [ 10].

The dependence of friction on the rotational orientation of graphene on a Pt(111) surface was studied by high-resolution friction force microscopy in ultra-high vacuum and interpreted through complementary simulations.