Sentence examples for high thickness ratio from inspiring English sources

Due to the high thickness ratio of this airfoil (t/c = 0.3), even at low angles of attack, the flow is still observed to separate quite severely.

The boat-like unit in osseous layer makes the scale flexible while keeping a high thickness ratio of osseous layer to fibrillary layer, which increases the flexibility and protection capacity of the scale This study may provide new strategy for the design of flexible armor or flexible devices.

For in-source mud-subordinated plays, source rocks and reservoir rocks are interbedded vertically, and the shale-formation thickness ratio is below 0.4 with high thickness ratios of sandstone and carbonate.

A general switching of transverse vibratory motions to surface-parallel modes at the higher thickness ratio is manifested vividly through three-dimensional deformed mode shape plots.

The multilayered TiAlN/ZrN coating with the lowest modulation period (25 nm) and the highest layer thickness ratio of TiAlN/ZrN (0.92) exhibited the best impact resistance (higher than 1 × 105 impacts) and the highest H3/E⁎2 ratio value of 0.443 GPa, indicating the best resistance to plastic deformation, among the studied TiAlN, ZrN and multilayered TiAlN/ZrN coatings.

Given a fixed volume fraction of capsules, the higher core-shell thickness ratio, the higher is the number of capsules which fracture.

Early menarche was also associated with a higher subscapular/triceps skinfold thickness ratio among white women, but this was largely because of the higher BMI levels among women with a central distribution of body fat (r = 0.37).

Belleville washer (or) disk spring with higher height to thickness ratio i.e. (h/t) is made with a bearing flat at upper Inner Diameter (I.D) and lower Outer Diameter (I.D) with appropriate radius over edge.

Shells having high imperfection to wall thickness ratio a/t are most affected, in contrast thicker shells are less sensitive.

While the excellent tribological performances of coatings with high load bearing capacity were attributed to the optimization of thickness ratio presenting high mechanical properties.

The results show that the value of the lateral thrust generated by the core during its high-mode buckling increases, possibly up to very high values, with the gap/core thickness ratio, the axial core strain, and the cumulated plastic deformation of the core.