Sentence examples for high surface tensile from inspiring English sources
Surface defects (deep grooves, smearing, adhesive chips, and indentations), a highly deformed thin surface layer up to a few microns in thickness, and high surface tensile residual stresses parallel to the grinding direction have been observed as the main damage induced by the grinding operations.
Considering European climates, Northern climates were found to result in higher surface tensile stresses than Southern climates.
The highest surface tensile residual stress, up to 374 ± 44 MPa, was induced by using the coarse (60#) grit size abrasive, as seen in Fig. 16a.
The coaxially electrospun fibers exhibited competent tensile properties for skin regeneration with high surface area and porosity.
When grinding with a 60# grit size abrasive, the high surface plastic deformation as well as grinding heat induced a high tensile stress, which was reduced by using the 180# grit size abrasive because of the lower mechanical effect.
Here also from the BET analysis, it is profoundly clear that SBA-15 is having a high surface area in comparison with MCM-41 which consequences the agglomeration of particles, end up with a drop in the tensile strength value.
The tensile values of the MPS-MMT composites illustrate that the interfacial interaction between the particles and the matrix diminishes due to very high surface area of both the nanofillers.
It is apparent that the total amount of tracer exchanged is much higher for the tensile strained LSC/STO system, indicating a significantly higher surface exchange coefficient there.
High meridional tensile stresses can appear where the internal roof surface joins the conical bore surface as the load is removed.
The study shows that the smaller the modulus, the smaller the height of the geosynthetic tube above the ground surface and the higher the tensile force in the geotextile or geosynthetic given the other conditions the same.
