Exact(1)
The first turbine stage, however, is often an impulse stage for controlling the steam flow and for rapidly reducing the pressure in stationary nozzles from its high steam generator value, thereby lowering the pressure that the casing has to withstand.
Similar(59)
High pressure steam generators and fine microelectronic structures now require water containing less than 1 ppb (ug/L) concentrations of silica.
For the multi-objective optimization, the designs on the Pareto front with a weight-to-power ratio lower than in the reference cycle showed a high heat recovery steam generator gas-side pressure drop and a low condenser pressure.
Typical tee and pipe components are subjected to thermal and mechanical loading histories which are variable and divided into two different regimes: low cycle fatigue and high cycle fatigue in steam generator vessel of nuclear power plants.
While the pressure boundary components of a steam generator contain high temperature and high pressure fluid, the internal components (or simply referred to as internals) provide structural support to the tube bundle and allow circulation of secondary side fluid (water) and separation of steam from the steam water mixture.
It is clear that the cost factor for incinerating a ton of waste in a grate furnace steam generator is high.
A High Temperature Helium Experimental Loop (HTHEL) for the purpose of studying the transportation and deposition behavior of solid fission products in high-temperature helium coming from the steam generator (SG) in the 10 MW High Temperature Gas-cooled Test Reactor (HTR-10) is studied and designed.
When a sodium water reaction (SWR) occurs due to leakage or breakage of steam generator tubes, high-pressure waves and corrosive reaction products are produced, which threaten the structural integrity of the components of the intermediate heat-transfer system (IHTS) and the safety of the primary heat-transfer system (PHTS).
A High Temperature Helium Sampling Loop (HTHSL) for studying the transportation (deposition) behavior and total amount of solid fission products in high-temperature helium coming from the steam generator (SG) in the 10 MW High Temperature Gas-cooled Test Reactor (HTR-10) and High Temperature Reactor-Pebble bed Modules (HTR-PM) are researched and designed, respectively.
When the level got too high in a part called a steam generator, it triggered the automatic shutdown of the turbine, which converts steam to mechanical energy.
The solid oxide electrolyser (SOEC) needs a steam generator and a high-capacity compressor is necessary as hydrogen is produced at atmospheric pressure.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com