Sentence examples for high slump from inspiring English sources

Two types of concrete specimens are prepared – one with moderate slump (80 mm) named as Conventional Concrete (CC) and other with high slump (675 mm) referred as Self-Compacting Concrete (SCC) and are monitored with carefully selected ultrasonic signal patterns.

There was a strong relationship between thixotropy determined by SBDA, BDP and DAV methods and formwork pressure in low slump flow SCC mixtures, while thixotropy determined by the YVR method showed good correlation with the formwork pressure in SCC mixtures having high slump flow values.

According to these results, concretes obtained had high slump values, highly cohesive and can be easily pumpable.

In particular it has a higher absorption rate than normal aggregate, needs much more water for mixing, and has a high slump loss rate depending on the elapsed time.

The concrete was placed at the driveway site anyway with very high slump, as if the truck driver had just added water to push the slump into an acceptable range.

It is demonstrated that it is only suitable for high slumps (>20 cm).

Larger volumes of filler in the paste produced lower yield stresses and, consequently, higher slump values were obtained.

The results indicate that for fresh mix of RAC with presence of the CBT induced a slightly higher slump compared with normal concrete (NC).

At low level of S/C ratio (S/C < 1.41), VFPs can fill the porosities between cement pastes and aggregates and has no negative effect on workability and, the highest slump (105 mm) for DSC was found at S/C ratio of 1.18.

CFBC ash cement pastes exhibit lower workability with higher slump loss.

It can be seen that the control mixture had highest slump compared to mixtures containing RHA and SF.