Sentence examples for high pressure stages from inspiring English sources

Nowadays total inlet temperature of gas turbine is far above the permissible metal temperature; as a consequence, advanced cooling techniques must be applied to protect from thermal stresses, oxidation and corrosion the components located in the high pressure stages, such as the blade trailing edge.

This paper presents a new cooling design for a typical two-pass channel of a high pressure stage turbine blade.

The test is complete when the high pressure stage of 414 MPa (60,000 psia) is reached and the injection pressure is reduced to atmospheric.

The analysed system includes a SWRO membrane in the high pressure stage and a BWRO membrane in the low pressure one, according to a well-known practice for small and medium size plants.

At high-pressure stages, gas desorption is mainly dominated by the slit-shaped macropores.

At high-pressure stages, large quantities of gas were desorbed and extracted through the fractured zone and the wells.

Gas desorption at high-pressure stages is mainly dominated by the slit-shaped macropores; gas can be rapidly released with large flow rates and high concentrations.

Gas desorption is relatively easy at high-pressure stages, whereas it is difficult at low-pressure stages because of the 'bottleneck effect' of the semi-open inkpot-shaped mesopores.

Figure 3a illustrates that the proportion of the slit-shaped macropores in Jurassic low-rank coal reaches 31.66 % and the permeability of macropores reaches 10.34 mD, which promotes gas flow in high-pressure stages.

Plasma-sprayed ceramic coatings, used as thermal barrier or abradable coatings in high-pressure stages of gas turbines, are exposed to high thermo-mechanical loading due to harsh operating conditions.

At this high-pressure stage Ca-amphibole was not stable.