Sentence examples for high pressure application from inspiring English sources

In a high pressure application, for pressures in excess of 1000 psi, a tandem seal arrangement or series seal arrangement is usually used.

The post-maneuver PEEP as well as the duration of high pressure application are also key factors in its success, with their accompanying potential for hemodynamic compromise.

SPS allows the formation of a fine and uniform microstructure in a short period of time through the rapid heating rate by pulsed electrical discharge and high pressure application [ 15].

Proper lubricants and lubrication methods for rolling bearings are essential for providing sufficient bearing performance in high pressure applications.

The size advantage of the CRS process particularly pays out in case of high pressure applications where equipment has to be small.

Activated carbon was evaluated as selective adsorbent for separation of CO2 from CO2/CH4 mixtures with special focus on high pressure applications.

Consequently, an optimum sorbent exhibiting a high working capacity for high pressure applications, e.g., pressure-swing adsorption units, will require a poorly-developed narrow microporous structure together with a highly-developed wide microporous and small mesoporous network.

Particle formation and design of solid particles and powdery composites with unique properties is at the moment a major development of supercritical fluids (synonyms: dense gasses, dense fluids, high pressure) applications.

In this work, NEMD simulations are performed in polycrystalline iron under shock compressions with our recently developed interatomic potential which has been carefully validated for high pressure applications previously.

More specifically, zeolites have been researched to a larger extent than activated carbons for carbon capture and hydrogen storage in applications involving relatively lower operating pressures [6, 7], whereas carbon-based materials, including activated carbons, have been preferred over zeolites for high pressure applications [7, 8].

(2) The opening performance and stiffness characteristics of bionic CS-DGS are inferior to that of common S-DGS when rotation speed equals to 0 r/min, which indicate that CS-DGS is not suitable for low speed or high pressure applications.