Sentence examples for high pellet from inspiring English sources
This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.
High pellet gains of 100 or more are required for an ICF reactor.
Relatively high pellet discretisations are needed to obtain physically meaningful structural coefficients.
We recommend that researchers explicitly address the power of their survey design to detect different pellet densities, because much larger sample sizes are needed at low pellet densities than at high pellet densities to obtain similar precision.
A high pellet yield (>90%), acceptable sphericity (AR < 1.2), low friability (<0.01%), fast disintegration (<10 min) and complete drug release in less than 20 min for all formulations, demonstrated the potential of this modified starch in formulations intended for extrusion/spheronisation.
The Li1+xNi1/6Co1/6Mn4/6O2.25+x/2 with appropriate lithium content, e.g., x = 0.3, thereby small particle size, high pellet density, and low cation mixing, brings on the largest discharge capacity, which is more than 288 mAh g−1 in the voltage range of 2.0 4.8 V at 25 mA g−1, and the lowest irreversible capacity loss of 47 mAh g−1 among these cathode materials.
A higher pellet intake was observed during the night period (18 00 09 00 h) whatever the age.
Li-rich layered oxides with micro-sized primary particles usually exhibit higher pellet density and better cycling performance.
New cryostat design will give access to lower cell temperature, necessary to improve the ice resistance and thus to allow higher pellet speeds.
Benefited from its larger particles and lower specific surface area, the obtained micron Li-rich layered material manifests its higher pellet density (3.18 g/cm3) and better cycling performance in comparison with the nano-sized Li-rich layered material.
The paper presents high frequency pellet injectors developed for edge localized mode mitigation and plasma fuelling of the EAST and KSTAR tokamaks.
