Sentence examples for high impregnation from inspiring English sources

However, at 550 °C, the negative effect of high impregnation ratio was found to be negligible small.

To obtain adequate activated carbon, one should work at high temperature of activation with a high impregnation ratio in the domains of interest and under air.

High impregnation ratios of MgO or Li2O affects the catalytic activity in a negative way, while low impregnation ratios increase the catalytic potential surpassing by more than sixfold what bare alumina can provide on its own.

A high carbon fiber content of 70 vol.% was achieved without introducing pores and/or defects into the CFFRC due to the low viscosity and high impregnation characteristics of the CBT resin.

The impregnation ratio strongly influences the porous texture of the ACFs, but they remain microporous even at high impregnation ratios, when, as shown by SEM, the fibrous morphology is lost due to agglomeration.

The diffusion experiments showed a high diffusion efficacy along with a high impregnation effect for one test product.

The same hindrance to the reaction yield at the higher impregnation concentration appears again for the case of the MgO impregnated catalysts (from the catalyst A3 to A4), at higher MgO concentration (A4) the BD yield decreases to 83.4%.

The highest impregnation yields for DXP and CIP in PMMA IOLs were 18.3 and 2.8 μgdrug/mgIOL respectively.

The in vitro release studied revealed an influence of the temperature on the impregnation yield, with a higher impregnation yield at 40 °C.

This might be due to the excellent carbonization of SFP at 550 °C which subdued the negative effect of higher impregnation ratio.

This might be due to the increased chloride concentration on prepared adsorbent at higher impregnation ratio, which might have repelled the incoming fluoride ion onto the surface of the adsorbent.