Sentence examples for high evaporator from inspiring English sources

The single stage turbine preliminary design is shown to be greatly influenced by media compressibility and the use of convergent-divergent profiled nozzles is promising to achieve the highest possible performance potential, especially at high evaporator pressure conditions.

The SLHX was shown to benefit system performance at higher evaporator temperatures with improvements of 16.5% for the once-through and 4% for the recirculating systems.

It is shown that one can obtain a higher thermal and exergy efficiencies at lower ammonia concentration and condenser pinch point temperature as well as at higher evaporator temperature.

Optimization results demonstrated the existence of distinct optimal area allocation for each objective function considered herein while higher evaporator to condenser global heat transfer ratio was preferred in all cases.

Furthermore, a plant with isobutane needs the higher evaporator pressure, mass flow rate and number of solar panels with the lower condenser pressure, storage tank capacity and regenerator effectiveness compared with R245fa and R123.

Producing the ice slurries used in cooling applications and ice pigging by crushing blocks of ice made from pure water and mixing the particles with a solution of freezing point depressant (FPD) later enables higher evaporator temperatures than if the solution itself is frozen in a scraped surface ice maker.

The experimental results show that the mass flow rate of the high-power evaporator is higher than that of the low-power evaporator, but the self-regulating ability of the TPTL is very limited.

Furthermore, rc growth extremely rises the endogenous avoidable exergy destruction of gas turbine (GT), CC and high pressure evaporator (HP.EVAP); it also increases the exogenous exergy destruction in LP.EVAP, GT, air compressor (AC) and PRE and causes the most increment in endogenous exergy destruction of GT by about 28.4%.

Gold substrates were prepared by vapor deposition of gold onto freshly cleaved mica in a high vacuum evaporator at ~10−7Torr.

Gold-coated substrates were prepared by vapor deposition of gold onto freshly cleaved mica in a high vacuum evaporator at approx. 10-7 Torr.

The samples were sputter coated with gold palladium under an argon atmosphere using a gold sputter module in a high vacuum evaporator and the samples were examined using SEM set at 15 kV.