Sentence examples for high conductivity of system from inspiring English sources

The further increasing of concentration (60%) will decrease greatly the microwave absorption due to the strong reflection of incident microwave induced by the high conductivity of system.

Apparently, the carbon material with open rich pores provides short ion diffusion pathways for energy storage and the binder-free method guarantees high conductivity of the whole system, leading to high-rate performance.

In this case, the filler particles link one another to form a conducting network throughout the system, leading to high conductivity of the composite.

High conductivity of the aqueous phase implies that the system resistivity varies depending on the membrane solvent.

Electromagnetic measurements with the EM38 system were not successful because of the insignificant contrast in conductivity between the walls and the natural environment, and the high conductivity of the widely spread slag.

The highest conductivity of all examined systems was 1.6 × 10−2 S cm−1 in the solution containing 1,2-dimethoxyethane (DME) and LiPF6 as the co-solvent and the electrolyte, respectively.

Pokuase recorded the highest conductivity of 3,500 μS/cm.

Semimetallic ceramic conductors have the highest conductivities of all but superconducting ceramics (described below).

Because of the high conductivity in the conductive channel, a large current can flow through it from source to drain.

In all systems, low concentration onset and a broad range of high conductivity was observed.

The highest electrical conductivity of the composite electrolyte system (∼7.55 × 10−3 S cm−1) was observed for the sample containing 8.0 wt.% SiO2.