The phrase "high adhesion between" is grammatically correct and can be used in written English.
You can use it to describe a strong bond or connection between two things or surfaces. For example: - The high adhesion between the two pieces of wood made the joint extremely strong. - The high adhesion between the car's tires and the road ensured a smooth and safe ride. - The scientist was amazed by the high adhesion between the two liquids in the experiment. - The company's new adhesive product boasts high adhesion between materials that were previously difficult to bond.
Surface modifications are necessary to reach a high adhesion between the coating and the substrate.
High adhesion between the ice and pile keeps the bustles in place during water level changes and allows the bustles to develop over time.
The orientation occurs during shearing of the material that sticks to the glass surface due to the high adhesion between the first layer of PTFE and the glass.
The high adhesion between thermoplastic and thermoset resins obtained with this method, together with the ability of thermoplastics to dissipate the impact damage in the first plies ensure the reliability of this stacked configuration.
Via detailed morphological, chemical analysis and designed verification experiment, it is proposed that the initial high adhesion between a-C and steel in PDMS accounts for the fracture failure of the analyzed a-C film, while the chemical adsorption of decomposed PDMS on a-C surface is responsible for the reduced friction.
Thus, high adhesion between PDMS membrane and the support mold is necessary.
The maximum nanohardness of the coatings is 24 GPa and the smallest friction coefficient is 0.48 together with the higher adhesion between the coating and substrate (HF1).
The surface free energy of treated sheets increased up to 72.6 mJ/m2, which later resulted into higher adhesion between the STEEL industrial protective varnish and the plasma treated aluminum sheets.
In fact, eyes with a higher adhesion between vitreous surface and retina or coexisting ERM, a pars plana vitrectomy should be performed with ILM peeling [ 7].
On the other hand, the pores and micro-cracks on the phosphate film enhanced the interfacial contact area as well as reinforced the anchoring of Ni P grains through the pinning effect, thus leading to high adhesion strength between Ni P and magnet substrate.
For most substrata, there was a link between high adhesion forces with bacteria and a high percentage of dead cells being retained on that substratum (even in the absence of a specific biocidal effect, such as silver).
